|
|
Evaluation of Fracture Tests on Selected Building Material Specimens via Double-K Model
Havlíková, Ivana ; Králík,, Juraj (referee) ; Němeček,, Jiří (referee) ; Keršner, Zbyněk (advisor)
The purpose of dissertation is the analysis of the calculation of fracture parameters using Double-K fracture model for quasi-brittle specimens with the stress concentrator loaded by three-point bending or wedge splitting. To calculation of these parameters was used the developed DKFM_BUT software in Microsoft Excel application with using of Visual Basic programming language. Furthermore, the adequate shape functions and compliance functions were introduced for the selected wedge splitting test configurations. Main part of this dissertation is the series of comprehensively implemented and evaluated fracture experiments on specimens from advanced building materials, while the attention was paid to the analysis of experimental data. Finally, the selected results obtained using mentioned software support were presented and discussed.
|
|
|
Modelling and analysis of the contact failure of ceramic materials
Machů, Zdeněk ; Majer, Zdeněk (referee) ; Ševeček, Oldřich (advisor)
This bachelor thesis deals with contact damage of ceramic materials. The purpose of this work is to create an analytical and FEM model of contact between a sphere and flat plate and subsequently use these models to analyse loading conditions that lead to crack initiation in the ceramic plate. The research part contains description of contact failures in ceramic materials with strong emphasis on Hertzian cone crack, followed by Hertzian theory of contact between two spheres and Hertzian stress field equations for flat plate. The next part of research chapters describes how contact problems are modelled in FEM software ANSYS Mechanical APDL and introduces the basics of fracture mechanics, which are necessary for the prediction of ring crack initiation. The next chapter contains information about the creation of analytical and FEM model and includes illustrative results of both models, which are then compared between these two models. The last chapter of this work deals with fracture mechanics FEM model that can simulate the ring crack initiation. This chapter also contains analysis of ideal crack position, where the crack has the best conditions for its initiation and growth. The last part of this chapter contains parametrical study where critical loading conditions are analysed in relation to radius of indentation sphere and different mechanical properties of used ceramic plate. In the final part of this work, the results of fracture mechanics FEM model are compared to experimental results of real specimens.
|
|
|
Influence of the residual stresses on the contact failure of ceramic laminates
German, Roman ; Majer, Zdeněk (referee) ; Ševeček, Oldřich (advisor)
The presence of the compressive or tensile thermal residual stresses in layers of a ceramic laminate induced due to different volume change of each layer´s material during the cooling from the sintering temperature can considerably affect resistivity of ceramics against contact damage. Within this work 2D parametric FEM models were created, in order to study the effect of the surface layer thickness, residual stress values and indenting body dimension on the initiation and propagation of the cone crack in the surface layer of the laminate. For the analysis of the critical conditions for the crack initiation, the coupled stress-energy criterion was used and for the determination of the direction of crack propagation we used the maximum tangential stress criterion. The results show that compressive thermal stresses in the surface layer increase the critical force for the crack initiation, shorten the crack distance from the contact area and shorten the occurred crack itself. Moreover, the compressive stresses enlarge the angle of the crack declination during the propagation process which cause an earlier crack arrest. The tensile thermal stresses have exactly the opposite effect. Results of simulations were compared to experimental results but due to lack of available measurements, the verification is partially limited.
|
|
|
On the Problems of LEFM of Composite Materials
Kopp, Dalibor ; Profant, Tomáš (referee) ; Klusák,, Jan (advisor)
The objects of this bachelor thesis is to familiarize oneself with the basics of linear elastic fracture mechanics (LEFM) of homogeneous materials and to specify these problems for composite materials. The work is divided into three parts. The first part is aimed at the basics of LEFM. The second part is concerned with generalization of LEFM. The third part is oriented to the numerical application of the studied problems to notches composed of two orthotropic materials.
|
|
|
Complex evaluation of brittleness of selected building composites
Machačová, Denisa ; Veselý, Václav (referee) ; Keršner, Zbyněk (advisor)
Specified topic of the thesis is a multilevel evaluation of brittleness of selected building composites. The work deals with the opinions of fracture parameters of test specimens of lightweight and ordinary concrete. Specimens further differed fibres content in concrete mixtures, their type and length. The work is divided into two parts, theoretical and practical. The theoretical part conceives composite materials and introduction to fracture mechanics. The practical part describes the different steps for fracture-mechanical parameters evaluation using StiCrack and Excel Visual Basic software. The main part of the work is to evaluate the brittleness of different test specimens, taking into account the type of concrete mix and type of fibres.
|
|
|
Influence of the residual stresses on the contact failure of ceramic laminates
German, Roman ; Majer, Zdeněk (referee) ; Ševeček, Oldřich (advisor)
The presence of the compressive or tensile thermal residual stresses in layers of a ceramic laminate induced due to different volume change of each layer´s material during the cooling from the sintering temperature can considerably affect resistivity of ceramics against contact damage. Within this work 2D parametric FEM models were created, in order to study the effect of the surface layer thickness, residual stress values and indenting body dimension on the initiation and propagation of the cone crack in the surface layer of the laminate. For the analysis of the critical conditions for the crack initiation, the coupled stress-energy criterion was used and for the determination of the direction of crack propagation we used the maximum tangential stress criterion. The results show that compressive thermal stresses in the surface layer increase the critical force for the crack initiation, shorten the crack distance from the contact area and shorten the occurred crack itself. Moreover, the compressive stresses enlarge the angle of the crack declination during the propagation process which cause an earlier crack arrest. The tensile thermal stresses have exactly the opposite effect. Results of simulations were compared to experimental results but due to lack of available measurements, the verification is partially limited.
|
|
|
Evaluation of Fracture Tests on Selected Building Material Specimens via Double-K Model
Havlíková, Ivana ; Králík,, Juraj (referee) ; Němeček,, Jiří (referee) ; Keršner, Zbyněk (advisor)
The purpose of dissertation is the analysis of the calculation of fracture parameters using Double-K fracture model for quasi-brittle specimens with the stress concentrator loaded by three-point bending or wedge splitting. To calculation of these parameters was used the developed DKFM_BUT software in Microsoft Excel application with using of Visual Basic programming language. Furthermore, the adequate shape functions and compliance functions were introduced for the selected wedge splitting test configurations. Main part of this dissertation is the series of comprehensively implemented and evaluated fracture experiments on specimens from advanced building materials, while the attention was paid to the analysis of experimental data. Finally, the selected results obtained using mentioned software support were presented and discussed.
|
|
|
Modelling and analysis of the contact failure of ceramic materials
Machů, Zdeněk ; Majer, Zdeněk (referee) ; Ševeček, Oldřich (advisor)
This bachelor thesis deals with contact damage of ceramic materials. The purpose of this work is to create an analytical and FEM model of contact between a sphere and flat plate and subsequently use these models to analyse loading conditions that lead to crack initiation in the ceramic plate. The research part contains description of contact failures in ceramic materials with strong emphasis on Hertzian cone crack, followed by Hertzian theory of contact between two spheres and Hertzian stress field equations for flat plate. The next part of research chapters describes how contact problems are modelled in FEM software ANSYS Mechanical APDL and introduces the basics of fracture mechanics, which are necessary for the prediction of ring crack initiation. The next chapter contains information about the creation of analytical and FEM model and includes illustrative results of both models, which are then compared between these two models. The last chapter of this work deals with fracture mechanics FEM model that can simulate the ring crack initiation. This chapter also contains analysis of ideal crack position, where the crack has the best conditions for its initiation and growth. The last part of this chapter contains parametrical study where critical loading conditions are analysed in relation to radius of indentation sphere and different mechanical properties of used ceramic plate. In the final part of this work, the results of fracture mechanics FEM model are compared to experimental results of real specimens.
|
|
|
Complex evaluation of brittleness of selected building composites
Machačová, Denisa ; Veselý, Václav (referee) ; Keršner, Zbyněk (advisor)
Specified topic of the thesis is a multilevel evaluation of brittleness of selected building composites. The work deals with the opinions of fracture parameters of test specimens of lightweight and ordinary concrete. Specimens further differed fibres content in concrete mixtures, their type and length. The work is divided into two parts, theoretical and practical. The theoretical part conceives composite materials and introduction to fracture mechanics. The practical part describes the different steps for fracture-mechanical parameters evaluation using StiCrack and Excel Visual Basic software. The main part of the work is to evaluate the brittleness of different test specimens, taking into account the type of concrete mix and type of fibres.
|
|
|
On the Problems of LEFM of Composite Materials
Kopp, Dalibor ; Profant, Tomáš (referee) ; Klusák,, Jan (advisor)
The objects of this bachelor thesis is to familiarize oneself with the basics of linear elastic fracture mechanics (LEFM) of homogeneous materials and to specify these problems for composite materials. The work is divided into three parts. The first part is aimed at the basics of LEFM. The second part is concerned with generalization of LEFM. The third part is oriented to the numerical application of the studied problems to notches composed of two orthotropic materials.
|
guest ::
